IT, elektronika, kütyük, stb.

 

 CATV GPON ONU ZTE F625G GPON ONU ZTE ZXA10 F625G With 4GE ports 2 voice ports and one RF interface for CATV

CATV GPON ONU ZTE F625G GPON ONU ZTE ZXA10 F625G With 4GE ports 2 voice ports and one RF interface for CATV

GPON Compliance 

ITU-T G.984.x GPON standards 
ITU-T G.984.2 amd1, Class B+ and Class C+ with APD receiver and DFB transmitter 
1.244Gbps burst mode upstream, 2.488Gbps downstream 
Upstream 1310nm, Downstream 1490nm 
Laser safety feature 
VoIP 
SIP(RFC 3261)/H.248/MGCP 
DTMF dialing /DTMF digits /DTMF encoding by RFC 2833 
5-REN, balanced ring, 55V RMS 
Codec: G.711 (μ-law and A-law), G.722, G.729 
32 ms echo cancellation 
VAD/CNG 
IN-BAND method 
T.38/T.30 FAX 
Caller ID/ Call Waiting/ Call Forwarding/ Call Transfer/ Call Toggle/ Three Way Calling/ Distinctive Ringing 
CATV
F-Type connector 
RF output level of +17 dBmV 
RF Passband: 47 MHz~870 MHz 
Switched on/off by remote control 
RF video over 1550nm wavelength 
Router
DNS Client/Server 
PPPoE 
DHCP 
SNTP 
IGMP Snooping 
WAN connection 
IGMP V1/V2/V3 
Firewall/Security
Traffic filtering based on UNI port, VLAN ID, 802.1p,UNI+802.1p or VLAN+802.1p 
DOS attack defending 
MAC address filtering 
BUM(Broadcast, Unicast, Multicast) attack protection 
Limit MAC address per UNI port or per ONT 
Broadcast packages rate limit 
AES-128 
Broadcast storm suppression 
QoS
Rate limitation 
Classifying upstream traffic into VLANs with various Ethernet priorities 
Marking Ethernet priority based on DSCP value 
Ingress rate limit/ Egress shaping 
SP/WRR/SP+WRR 
Management
TR-069 remote management 
Local WEB and telnet management 
Local built-in diagnostic function 
Logs and statistics 
Loop back function 
OMCI management 
Hardware Specifications 
WAN: One SC/APC port for GPON 
LAN: Four RJ-45 ports for Gigabit Ethernet interfaces 
FXS: Two RJ-11 ports for VoIP 
CATV: One RF interface 
UPS: One RJ-45(reverse) port for UPS monitor 
Button: - Reset - Power ON/OFF 
LED Status indicators : Power, PON, LOS, ALARM, LAN1, LAN2, LAN3, LAN4, POTS1, POTS2, RF, BATTERY 
Electrical Characteristics 
Power input: 12 VDC 1.5A 
Power consumption: Less than 11W 
Physical Characteristics
Net weight: 468g 
Size: 208 (W) x 159(D) x 44(H) mm 
Environmental Characteristics
Operating temperature: -5°C ~ 45°C (23°F ~ 113°F) 
Humidity: 5% ~ 95% (non-condensing) 
Certification 

CE certification

 user manual: 1ZXA10 F625G PON ONT User Manual.pdf 5.6M

  

How to Hard Reset a Router

On the back or bottom of your router you should find a small pin sized reset button.

how to reset a router

    • While your router is plugged in, press and hold your router's reset button for 30 seconds. You may have to use a paperclip or pin to press your router's reset button.

 

    • You should notice your router's lights flicker and flash. That is an indication that your hard reset is taking effect.

 

  • After you've held your router's reset button down for 30 full seconds, allow the router to reboot. (Just leave your router alone for a few minutes and allow it to gather itself.)